ZJ Series Roots Vacuum Pump
ZJ series Roots vacuum pump
This series of Roots-type vacuum pumps cannot be used alone. It needs to be used in series with the pre-stage vacuum pump to increase the pumping rate of the pre-stage vacuum pump when the pressure is lower than 1.3×103~1.3×10-1 Pa. The structure is composed of two 8-shaped rotor sections and a rotor casing, and the two rotors do not contact each other and rotate in opposite directions in synchronization with each other.
ZJ series Roots vacuum pumps are mainly applied to:
PVD coating, magnetron sputtering, ion plating, optical coating etc;
Single crystal furnace, polycrystalline furnace, sintering furnace, annealing furnace, quenching furnace etc;
Vacuum drying, freeze drying, leak detection system, gas recovery system, liquid crystal injection etc;
Vacuum industry such as refrigerators, household air conditioners, central air conditioners, automatic evacuation lines for backlights, and exhaust equipment.
| Model | ZJ-30 | ZJ-70 | ZJ-150 | ZJ-300 | ||
| Pumping ratem3/h(L/min) | 50HZ | 100(1667) | 280(4670) | 500(8330) | 1000(16667) | |
| 60HZ | 120(2000) | 330(5500) | 600(1000) | 1200(20000) | ||
| Max. inletpressure(when continuous work) | 50HZ | 1.2X103 | 1.3X103 | |||
| 60HZ | 9.3X102 | 1.1X103 | ||||
| Maximum allowable pressuredifference(Pa) | 50HZ | 4X103 | 7.3X103 | |||
| 60HZ | 3.3X103 | 6X103 | ||||
| Ultimate pressure(Pa) | 1X10-1 | |||||
| Standard rough pump m3/h | 16 | 40、60 | 90、150 | 150、240 | ||
| Motor(2poles)KW | 0.4 | 0.75 | 2.2 | 3.7 | ||
| Lubricating oil specification | Vacuum Pump Oil | |||||
| Oil Capacity L | 0.4 | 0.8 | 1.6 | 2.0 | ||
| Cooling Water | Flow L/min | / | 2*1 | 2 | 3 | |
| Pressure difference MPa | / | 0.1 | ||||
| Water Temp 0C | / | 5-30*2 | ||||
| Weight Kg | 30 | 51 | 79.5 | 115 | ||
| Inlet Dia. mm | 50 | 80 | 80 | 100 | ||
| OutletDia.mm | 50 | 80 | 80 | 80 | ||
