Lolu chungechunge lwamaphampu evacuum ohlobo lwe-Roots alukwazi ukusetshenziswa lodwa.Idinga ukusetshenziswa ochungechungeni ngepompo ye-vacuum yangaphambi kwesiteji ukwandisa izinga lokumpompa lepompo ye-vacuum yangaphambi kwesiteji lapho ingcindezi ingaphansi kuka-1.3×103~1.3×10-1 Pa. Isakhiwo sakhiwe ngama-8 amabili. -izingxenye ze-rotor ezimise kanye ne-rotor casing, futhi ama-rotor amabili awaxhumani futhi ajikeleze ngezindlela ezihlukile ngokuvumelanisa komunye nomunye.
Lolu hlobo lwepompo, phakathi kwama-rotor naphakathi kwe-rotor ne-casing yangaphandle, aluthinti omunye nomunye, futhi asikho isidingo sokukhathazeka mayelana nokulahlekelwa kwe-friction.Ngakho-ke, akukho lubricant edingekayo ekamelweni le-rotor.Ngakho-ke, endaweni yokusebenza yomhwamuko wamanzi nomhwamuko we-solvent, inokusebenza kokukhipha okuzinzile.
Amaphampu e-ZJ Roots vacuum asetshenziswa kakhulu ekufakweni kokuhwamuka, i-magnetron sputtering, i-ion plating, i-optical coating, isithando somlilo sekristalu eyodwa, isithando somlilo se-polycrystalline, isithando somlilo esishisayo, isithando somlilo esishisayo, isithando somlilo esicisha umlilo, ukomiswa kwe-vacuum, amasistimu okuthola iqhwa, ukomisa kabusha kokuvuza. , umjovo wekristalu owuketshezi, iziqandisi, ama-air conditioner asekhaya, ama-air conditioner amaphakathi, imigqa yokuphuma ezenzakalelayo yamalambu angemuva, imishini yokukhipha umoya nezinye izimboni ze-vacuum.
Imingcele yobuchwepheshe yochungechunge lwe-ZJ Roots vacuum futha
| Imodeli | ZJ-30 | ZJ-70 | ZJ-150 | ZJ-300 | ||
| Izinga lokumpompa m3/h (L/min) | 50HZ | 100(1667) | 280(4670) | 500(8330) | 1000(16667) | |
| 60HZ | 120(2000) | 330(5500) | 600(1000) | 1200(20000) | ||
| Ubukhulu.ingcindezi yokungena (uma umsebenzi uqhubekayo) | 50HZ | 1.2X103 | 1.3X103 | |||
| 60HZ | 9.3X102 | 1.1X103 | ||||
| Umehluko omkhulu wengcindezi evumelekile (Pa) | 50HZ | 4x103 | 7.3X103 | |||
| 60HZ | 3.3X103 | 6x103 | ||||
| Ingcindezi ephezulu (Pa) | 1x10-1 | |||||
| Iphampu eqinile evamile (m3/h) | 16 | 40, 60 | 90, 150 | 150, 240 | ||
| Imoto(2poles) (KW) | 0.4 | 0.75 | 2.2 | 3.7 | ||
| Ukucaciswa kwamafutha okugcoba | Vacuum Pump Amafutha | |||||
| Amandla kawoyela (L) | 0.4 | 0.8 | 1.6 | 2.0 | ||
| Amanzi Okupholisa | Ukugeleza(L/min) | / | 2*1 | 2 | 3 | |
| Umehluko wengcindezi (MPa) | / | 0.1 | ||||
| Izinga lokushisa lamanzi (0C) | / | 5-30*2 | ||||
| Isisindo (Kg) | 30 | 51 | 79.5 | 115 | ||
| I-Inlet Dia.(mm) | 50 | 80 | 80 | 100 | ||
| I-Outlet Dia.(mm) | 50 | 80 | 80 | 80 | ||
Sicela ukunakekelwa okufanele ngesikhathi sokuhlolwa okuvamile.Isikhathi sokunakekela siyahlukahluka kuye ngenjongo, isikhathi sokuhlola, ukusetshenziswa kokuqala kuya kanye ngosuku, akunankinga, amasonto kusukela ngesikhathi sokuqala ngoMsombuluko, ngemva kungasethwa kube kanye ngenyanga.Ngaphezu kwalokho, mayelana izinga lokuhlola okubukwayo, usizo, bona isimo sedivayisi, phakamisa ukuthi uqinisekise kanye ngosuku.Enqubweni yokusebenzisa, hlola okungenani kanye ezinsukwini ezintathu ezintweni ezilandelayo.
1.Inani lamafutha okugcoba liphakathi komugqa wezinga lamafutha amabili.
2. Amafutha okugcoba noma ashintshe umbala.
3. Ukuthi amanzi okupholisa ngokuhambisana nezinhlinzeko zokufinyelela kwethrafikhi.
4. Ukuba khona komsindo ongajwayelekile.
I-5.Inani lamanje le-motor lijwayelekile.
6. Noma yikuphi ukuvuza.
7. Isigxivizo esiwumshini uma kukhona ukuvuza.Susa ikhava yengxenye yenjini ipulaki elandelayo yokudonsa uwoyela we-seal, qiniseka ukuthi akukho ngaphakathi ku-oyili wokugcoba.
8. Hlola okuqukethwe: Hlola okuqukethwe kufanele kube ukuhlolwa okuvamile kwesimo sokusebenzisa iphampu, ukuze ugweme ukwehluleka kwephampu, andise impilo yesevisi yepompo.Sicela ubheke uhlu olulandelayo lokulungisa.
Isikhathi sokuthumela: Mar-24-2022